HomeMy WebLinkAbout112 Bridlewood Road (6) �ikLocationE�ABuilding Permit# (v�
SWIMMING POOL REQUIREMENTS:
This list is not all inclusive; please refer to pool packet.
❑ A 48"barrier will be provided to protect the pool access. Including a temporary fence
for inground pools prior to filling.
❑ Access gates will be self closing and self latching(if less than 54"high they shall be on
the pool side and be protected within 18"of release mechanism).
❑ Doors providing direct access to the pool shall either have an alarm, a self closing self
latching device 54" above the floor, or a safety cover over the pool.
❑ No receptacles within 10' of pool. (locking type receptacle for pool equipment must be
at least 5' from pool and GFCI protected).
❑ All metal parts of pool structure, fixed metal parts within 5' of pool,pump motors etc.,
shall be bonded with a minimum#8 solid copper wire.
❑ Convenience GFCI receptacle shall be provided between 10' and 20' from pool.
❑ Trench depth for 20 amp. circuit to pool equipment shall be 12"minimum.
❑ A surface pool alarm shall be installed pursuant to Public Act 99-140.
REQUIRED SWIMMING POOL INSPECTIONS:
The following is a list of inspections that need to be performed prior to the continuation of work.
Requests for inspections can be made by calling the Building Department at 644-2511 ext. 230.
1. TRENCH AND BONDING-Electrical trench depth verification and bonding of pool and
metal appurtenances including metal reinforcing for gunite pools.
2. FINAL ELECTRICAL-Location of equipment and GFCI protection. Convenience outlet
provided.
3. FINAL-Swimming pool access protection must be provided before pool can be used.
Each swimming pool installation requires a Building and an Electrical permit. Additional
permits and inspections are required for pool decks.
I have read and understand the requirements listed above.
Signed Date ,` [ 1